• Opening Hours: 8:30am - 5pm weekdays and 9am - 2pm Saturdays (enquiries only)
  • Email Enquiry
  • Allplastics Sydney NSW
  • Allplastics on Instagram Allplastics on Facebook Allplastics on Twitter Allplastics on Linkdin Allplastics on Pinterest Allplastics on YouTube

 

Polycarbonate Solutions for Swimming Pool Compliance

thumb

Did you know that drowning is a leading cause of preventable death in children under 5 years of age?

Safe Pools Smart Fences is based in the North-Western area of Sydney, where they serve clients from the Upper North Shore & Hornsby shire suburbs, as well as the Hills District. Safe Pools Smart Fences undertake a large variety of pool area safety compliance repairs, modifications and installations. They have been client of Allplastics Engineering since 2016 when they started their business to focus on this huge growth area.

 
 
 

The NSW new legislation effective 29th April 2016 mandates that properties with a pool to be sold or leased must arrange a compliance certificate.

Did you know that more than 80% of existing pool fences are non-compliant in one or a number of ways?

They have used clear UV2 Polycarbonate of various thicknesses acquired from Allplastics Engineering to implement barriers of various kinds to raise existing pool fences, reduce gaps under or around pool fences to less than 100mm, or to stop children from climbing over pool fences in tricky situations.

“The attached photos show examples of how we raised an existing black aluminium pool fence around a common area pool fence in the middle of a retirement village in St Ives.” said Michael Gyler, director of Safe Pools Smart Fences.

 “The existing 1.2+m high pool fence was deemed climbable due to lines of hedging shrubs being on outside of pool fence. The owners committee did not want to remove the shrub hedges, as they served as an important privacy barrier to the numerous units surrounding the pool. So we built a raised frame of 1.8+m high using black aluminium then fixed the clear UV2 polycarbonate sheets to this raised frame.”

The other photo is of a UV2 polycarbonate shield (again framed by aluminium RHS section) hovering above a glass pool fence panel adjacent to a rock retaining wall which could have allowed a child to climb and jump over that pool fence.

Both the body corporate in charge of the retirement home and the owner with the glass pool fence were ecstatic about the creative and transparent/ inconspicuous solutions, whilst achieving compliance.

Allplastics provides a wide range of architectural and building elements including acrylics and polycarbonates. Acrylic has approximately ten times the strength of standard glass. Polycarbonate is virtually unbreakable with 250 times the strength of glass.

Allplastics Architectural division can also provide custom made DONCHAMP® Acrylic Pool Windows and Infinity pool panels for your next swimming pool, aquarium or decorative architectural project.

Polycarbonate UV2

  • Outstanding toughness
  • Good chemical resistance to solvents and cleaners
  • Good electrical insulation
  • Outstanding weatherability
  • Temperature: -40C° to 130C°
  • 250 times the strength of glass

DONCHAMP® pool windows

  • Excellent strength
  • High mechanical properties and surface hardness
  • Easy to clean and maintain
  • Superior optical properties (meeting ISO standards)
  • Engineered to 30 year design criteria
  • High rigidity
  • Dimensionally stable
  • Exceptional UV stability
    (30 year manufacturer’s warranty-clear only)
  • Light weight

Availability of Polycarbonate UV2:

Size (mm):

  • 2440 x 1220
  • 2440 x 1830
  • 3000 x 2000 

Thickness (mm): 1 - 12

 

Availability of DONCHAMP® Acrylic:

  • Size (mm):  
    9300 x 3000
    7800 x 3000
    7300 x 3000
    6800 x 3000
    6300 x 2800
    6100 x 2900
    5300 x 2800
    5020 x 2200
    4900 x 2500
    4900 x 2500
    4800 x 2900
    3970 x 1970
    3000 x 2000 (lower thickness range)
    2440 x 1220 (lower thickness range)


  • Thickness (mm): 30mm - 750mm (thinner gauges also available).

PROJECTS & NEWS

About Us

ISO-9001-2015

Allplastics Engineering Pty Ltd is a privately owned Australian business specialising in the machining, fabrication and supply of polymer/ plastic materials for industrial, building and architectural applications
more about us >>

Our Memberships

asga20logo20small

interior-fitout-association-ifa-logo

ccofc

NSW Business Chamber

covid-safe-badge

Contact us

  • Email Enquiry
  • Tel: (02) 8038 2000
  • Fax: (02) 9417 6169
  • Address:  Unit 20/ 380 Eastern Valley Way, Chatswood, NSW 2067.
  • Opening Hours:
    Weekdays: 8:30am - 5pm
    Saturdays: 9am - 2pm (enquiries only/warehouse closed)

Allplastics on Instagram Allplastics on Facebook Allplastics on Twitter Allplastics on Linkdin Allplastics on Pinterest Allplastics on YouTube

review us on Google

Terms and Conditions
Privacy Policy